← All posts

Home Network Start9 November 17, 2026

Put a VPN on the Guest Profile of Your Start9 Router

A VPN is a privacy and security tool, and putting one on the home router itself is one of the more useful ways to run it. This is part of the series where I use a Start9 router to build a secure home network. In this one I add a VPN to a single profile: the guest network.

A separate guest network matters whether you use a VPN or not. You do not control those devices, and you do not control what people do on them. If they can see the rest of the house, they can open a hole into the devices you actually care about. Separate profiles are the requirement. The VPN is the extra step.

Watch Forrest HODL add an Obscura WireGuard VPN to the guest profile on a Start9 router.

What the guest VPN is doing

Without a VPN, a guest device still gets to the internet through your ISP. The sites they open see your home's public IP address, and your ISP can see where that device is going.

Send that traffic through a VPN and two things change. The websites see the VPN's address, so your home IP stays hidden. Your ISP sees a connection to the VPN, and it does not get a direct look at the guest device's destinations.

You are stacking both ideas. Devices you do not trust stay off your personal network, and their internet traffic leaves through the VPN.

Why I am using Obscura

Obscura is interesting because the exit is not an Obscura node. They only ever see your IP address. They forward the request to another VPN provider. That provider goes out to the site you asked for, and the reply comes back to you. Obscura never sees the browsing history. It is a really good split.

If you already have more than one VPN, StartWRT can tether them so one hop knows the IP and another knows the destinations, and neither has the whole picture. I am letting Obscura do that job.

If you sign up through the link in the video description, it helps me out. The free trial is enough to follow this guide.

1. Start the free trial and save the account number

  1. On Obscura, press Try for free. That creates an account number.
  2. Copy the account number, and download it as a text file. I put mine in Downloads.
  3. Confirm that you stored the account number somewhere secure, then continue.
  4. Paste the account number and log in.

The trial I got ends in a week. You can pay with Lightning or Monero, and you can subscribe from the same account.

2. Generate a WireGuard config

Back on the Obscura page, open Use with WireGuard. An account has five connection slots. The WireGuard file you generate for the router holds one of those slots for as long as it stays on the account, even when the tunnel is off. Delete that config in Obscura if you want the slot back.

  1. Register a WireGuard connection and leave the defaults.
  2. Leave the exit server on Fastest (recommended).
  3. Press Generate config.
  4. Download the configuration file. I put that in Downloads as well.

3. Add it on the Start9 router

Open the router at router.lan and sign in. Go to Outbound VPNs.

  1. Press Add.
  2. Drop the Obscura config file you just downloaded into the form.
  3. Press Add VPN.
  4. Leave the VPN enabled.

4. Apply it only to the guest profile

I am testing this on the guest profile, not on the whole house.

  1. Open Profiles.
  2. On the guest profile, open the three dots and press Edit.
  3. Go to WAN and Internet.
  4. Set Outbound routing to VPN.
  5. Select the Obscura VPN and press Save.

The other profiles still go straight out through the ISP. Guest is the one that shows the VPN. On the Outbound VPNs page, that tunnel is listed as used by guest.

5. Check that it is actually routing

Connect the computer to the guest network. Back in the Obscura account, that connection shows as active. Everything on the guest profile is now going through the VPN. You do not install a VPN app on each phone or laptop. The router enforces it for every device on that profile.

If you disable the VPN under Outbound VPNs, StartWRT warns you that any profile using it falls back to the regular WAN. The guest profile goes back to a normal internet path, and Obscura shows the connection as gone. Turn it back on when you want guest traffic on the VPN again.

This is one piece of StartWRT

That is an outbound VPN on a Start9 router, using WireGuard, applied to one profile. Next in the series I want to use inbound VPNs to tunnel into servers on the home network, and set up port forwarding so a Bitcoin node can take more connections. A router can do more of this than most people expect.

Get the router: The Wi-Fi model is at store.start9.com. Code BNC5 takes 5% off, and it is linked in the video description.

Want this set up on your own network?

I do private one-on-one sessions for Bitcoin security and digital security in general. Reach me through pathtobitcoin.xyz.

Book a 1:1 Coaching Session

Watch the Video Walkthrough

The full pass: Obscura account, WireGuard config, then the guest profile on the Start9 router.