← All posts

Home Network Start9 November 16, 2026

How to Set Up the Start9 Router: StartWRT, Root CA, and Security Profiles

Most people plug in a home router, change the password, connect their phones, and never open the settings again. That box still sits in the middle of everything. Every laptop, phone, Bitcoin node, camera, and guest device on your network talks to the internet through it, and it decides whether those devices can talk to each other.

This guide is the first setup of the Start9 router, which runs StartWRT, Start9's open-source router system built on OpenWrt. You will connect the hardware, create an admin password, trust the local Root CA on Windows, and create a guest security profile so visitors are not sitting on the same network as your node.

Later posts in this series will go further: outbound and inbound VPNs, DNS rules, port forwarding for a Bitcoin node, and tying the router to a StartOS server. The goal of this one is a working router and a clear picture of why the profiles matter.

Watch Forrest HODL unbox the Start9 router, finish first-time setup, and create a guest security profile.

Why the router is part of Bitcoin security

A typical home network is one flat LAN. The TV, the security camera, a guest's phone, and the machine running your StartOS or Umbrel node can all see each other. If one of those devices is compromised, it already has a path toward the rest of the house.

StartWRT replaces that flat network with security profiles. Every device lands in a profile based on how it connects: the Wi-Fi password it uses, the Ethernet port it plugs into, or the inbound VPN it joins. Each profile is its own network. A guest can reach the internet without being able to browse your node, your admin machines, or the rest of the house.

That is the first line of defense, and it is the reason a purpose-built router is worth the setup time if you self-host or hold Bitcoin at home.

What StartWRT actually is

StartWRT is the operating system on the Start9 router. It is a fork of OpenWrt with Start9's own interface, so you get the control people expect from OpenWrt without living in raw firewall zones and VLAN screens on day one. The interface is organized around a few jobs:

  • Internet: WAN settings, published ports, and outbound VPNs.
  • Network: LAN addressing and the devices the router can see.
  • Security profiles: who can see whom, which DNS they use, and whether their traffic leaves through a VPN.
  • Points of entry: Ethernet ports, Wi-Fi passwords, and inbound WireGuard servers.
  • System: updates, backups, logs, and the built-in help.

The software is open source. You can read it, and firmware updates show up in the interface for you to install when you choose. StartWRT does not update itself in the background.

Official docs live at docs.start9.com/start-wrt. The in-app help toggle explains each screen as you open it, and the Start9 logo in the interface links to the same documentation.

1. Connect the hardware

Follow the quick start in the box. The physical setup is short:

  1. Connect the router's WAN port to your modem with an Ethernet cable.
  2. Plug the router into power.
  3. Connect the included switch to the LAN port if you want wired devices. Devices on that switch inherit the profile assigned to the LAN port.

Then join the network. If the router has Wi-Fi, connect to the StartWRT network using the password printed on the sticker on the bottom of the device. Or plug a computer straight into the switch with Ethernet.

United States units: Start9 ships US routers as wired routers. Wi-Fi comes from a module you install yourself. If there is no StartWRT network, set the router up over Ethernet and add the Wi-Fi module using Start9's Wi-Fi module guide.

2. Create the admin password

A setup page should open on its own. If it does not, open a browser and go to router.lan.

  1. Create an admin password of at least 12 characters. This password protects the web interface. It is separate from the Wi-Fi password.
  2. Confirm it and set the password.
  3. The page confirms setup is complete. Open router.lan in a normal browser tab to continue. If it only opens inside the captive-portal popup, leave that popup and type the address yourself.

Internet access stays blocked until that admin password exists. If you close the setup window early, go back to router.lan and finish it. The router also picks up your timezone from the browser. You can change that later under Settings.

3. Trust the Root CA on Windows

StartWRT serves its interface over HTTPS with a certificate signed by a Root CA that lives on the router, the same idea as a StartOS server. Your computer will not trust that certificate until you install it. You repeat this on every device you use to open the StartWRT interface. Tor and clearnet access do not need it. Local HTTPS does.

On the trust screen, download the Root CA. Browsers often block that download and label it insecure, because you are still on the untrusted address. Choose Keep. Then open View instructions and follow the steps for your operating system. The walkthrough below is Windows, using the Microsoft Management Console, which is what the on-screen guide asks for.

Open the certificate console

  1. Press the Start menu, type mmc, and run it as administrator. Approve the User Account Control prompt.
  2. Go to File > Add/Remove Snap-in.
  3. Select Certificates and click Add.
  4. Choose Computer account, click Next, leave the defaults, and click Finish.
  5. Confirm Certificates (Local Computer) is in the selected snap-ins list, then click OK.

Import into Trusted Root Certification Authorities

  1. In the left tree, open Certificates (Local Computer) > Trusted Root Certification Authorities > Certificates.
  2. Right-click Certificates, then choose All Tasks > Import.
  3. Click Next, then Browse, and open the Root CA file from your Downloads folder. You may need to change the file-type filter so the certificate is visible.
  4. Click Next. The store should already read Trusted Root Certification Authorities. Click Next again, then Finish.
  5. Click OK on the success dialog. You should see the StartWRT local root certificate in that folder.

Close the console. You can save the console layout if you want. The certificate stays imported either way. Refresh router.lan. The page should report that the Root CA is trusted. Log in with the admin password you just created.

Firefox, Thunderbird, and LibreWolf keep their own certificate store. If you use one of those, finish the extra Mozilla step in Start9's Root CA guide after the Windows import.

4. Name the Wi-Fi and add a guest password

Open the Wi-Fi settings if you plan to use wireless a lot. Set your country, and rename the network if you want something other than the default. After a name change, reconnect your computer to the new network name.

StartWRT uses one Wi-Fi name and several passwords. The password is the point of entry. Whoever has a given password joins the security profile tied to that password. They do not pick a separate "guest SSID" the way a consumer router usually works.

  1. Add a Wi-Fi password and label it for guests.
  2. Assign it to the Guest security profile.
  3. Save, then give that password to visitors.

A device that joins with the guest password lands in the guest profile. You can later force that profile out through a VPN and keep it from seeing the admin or home profiles. The same pattern works for other groups:

  • Smart devices: a separate password for TVs, cameras, and other IoT gear, so a cheap cloud device cannot scan the rest of the LAN.
  • Children: its own profile, where you can add DNS filtering and an internet blackout schedule for overnight hours. LAN rules you allow can stay available while internet access is off.
  • Admin and home: the machines you actually trust, including a StartOS or Umbrel node.

Each profile has its own password. That password is the key to the virtual network, not a second copy of your admin login.

5. Install the first update

Before you build rules on top of a fresh unit, install the current StartWRT release. Open System settings, find the update, and choose Update now. Let it finish. You decide when updates run. The router will not apply them on its own. If an in-app update ever fails, Start9 documents a microSD reflash as the fallback.

What this router can do next

The first boot only gets you online and separated. The interesting controls are already in the interface, and they are what the rest of this series will configure:

  • Outbound VPNs. Send a profile's internet traffic through a WireGuard provider such as Mullvad or Obscura. You can chain providers. If the tunnel drops, that profile's traffic stops instead of leaking out over the normal connection.
  • Inbound VPNs. Run a WireGuard server on the router so you can reach a specific profile from outside the house. Remote clients inherit that profile's rules.
  • Published ports. Forward ports so a Bitcoin node can accept clearnet connections and be useful to the network. Port-opening permission is off by default and granted per device. A linked StartOS server can open the ports its public addresses need.
  • DNS and schedules. Different resolvers per profile, plus blackout windows for Wi-Fi or for a single profile's internet access.

A practical home layout starts with the install you just finished, then tightens each profile: VPN and DNS for guests and IoT, remote access only where you want it, and a clearnet path for the node. That is the build this series is heading toward.

Get the router: The Wi-Fi model is listed at store.start9.com. Use code BNC5 at checkout for 5% off.

Want help segmenting the network around your node?

Book a private session if you want a hand with StartWRT profiles, a StartOS or Umbrel node, VPNs, or the rest of a self-custody setup.

Book a 1:1 Coaching Session

Watch the Video Walkthrough

The full first look: cabling, the setup wizard, trusting the Root CA, and a first guest profile.